Brother Computer Keyboard LN9049001 User Manual

[GETTING STARTED]  
REFERENCE  
PREPARATION  
Power Supply & Tape Cassettes  
OPERATION  
3
1
2
Keyboard & LCD  
Troubleshooting  
Error message  
Width  
Style  
Remove the back cover by pressing in  
the rough area at the top end of the  
machine.  
Size  
Message  
Cause/Remedy  
If a tape cassette is already installed,  
remove it by pulling it straight up. Also, if  
batteries are already installed, remove  
them.  
• Be sure to turn off the machine before  
replacing the batteries or the tape  
cassette.  
Battery  
Invalid  
No Text  
The batteries are weak. Replace them with new ones.  
Cursor  
An invalid number was specified as the Label Length setting.  
USER'S GUIDE  
English  
• The Print key or Preview key is pressed when no text has  
been entered.  
• A Copies (copy printing) setting was being specified, when  
Underline/Frame  
Label Length  
Caps  
Num Lock  
no text is entered.  
Print key  
LN9049001  
Printed in China  
Line Lmt  
Line Limit. You can have up to 2 printable lines.  
was pressed to enter a third line.  
Time/Date  
Time/Date key  
Function key  
Cursor key  
Preview key  
Power key  
Fn  
P
Print head  
Full  
The maximum number of characters (80 characters) have  
already been entered.  
Q
W
Z
E
R
C
T
Y
B
U
N
I
O
Backspace key  
INTRODUCTION  
Insert four new AAA-size alkaline  
batteries (LR03), making sure that  
their poles point in the correct  
directions. Always replace all four  
batteries at the same time using brand  
new ones.  
A
S
D
F
G
H
J
K
L
/
Character keys  
With your P-touch 80, you can create labels for any application. Select from  
the many frames, character sizes and styles to design beautiful custom la-  
bels. In addition, the variety of tape cartridges available allows you to print la-  
bels with different widths and exciting colours.  
Read this manual carefully before starting and keep the manual in a handy  
place for future reference.  
-
,
'
X
V
M
.
Text Lmt  
Text Limit. The text length exceeds the selected label length  
or the selected Auto Format setting length.  
Caps  
Num  
Symbol  
Space  
Accent  
Shift key  
Caps key  
Num Lock key  
Shift key  
Enter key  
Accent key  
Space key  
What to do when...  
Problem  
Solution  
Symbol key  
The display stays blank • Check that the batteries are correctly inserted.  
after you have turned on • If the batteries are weak, replace them.  
the machine.  
GENERAL PRECAUTIONS  
• The LCD shows one row of 12 characters; however, the text that  
you enter can be up to 80 characters in length, which will scroll  
across the display.  
Use only Brother M tapes with this machine. Do not use tapes that do not have  
Language setting of the  
machine is incorrect.  
Turn off the machine and then while holding  
the  
mark.  
Insert a tape cassette, making sure  
that it snaps into place.  
down  
and  
, press  
to turn the machine  
and  
Do not clean the machine with alcohol or other organic solvents. Only use a soft, dry  
cloth.  
Do not touch the print head mechanism. Use a soft wipe (e.g. a cotton swab) when  
cleaning the print head.  
• Use Cursor key while holding down Shift key to go to beginning /  
end of the text.  
back on. Finally, release  
.
Tape guide  
• Note: The text and formats in the display are erased. Also,  
the language, unit and clock settings will be cleared.  
Initial Setting  
Cutter's edge  
To avoid injuries, do not touch the cutter's edge.  
The machine does not • Check that the tape cassette has been inserted correctly.  
To prevent damage or breakage of the LCD glass, do not press on the display.  
Do not put any foreign objects into or heavy objects on the machine.  
Do not leave any rubber or vinyl on the machine for an extended period of time,  
otherwise the machine may be stained.  
Start your machine  
Provide power by installing four AAA batteries, and then press  
print, or the printed  
characters are not  
formed properly.  
• If the tape cassette is empty, replace it.  
• Make sure that the back cover is properly closed.  
.
The setting has been  
lost.  
• The batteries may be weak. Replace them.  
Do not get the machine wet, such as by handling it with wet hands or spilling  
beverages on it.  
Do not expose the machine to extremely high temperatures or high humidity. Never  
leave it on the dashboard, in the back of your car, near heaters or other hot  
appliances. Keep it out of both direct sunlight and rain.  
Avoid using the machine in extremely dusty places.  
Depending on the environmental conditions and the applied settings, some  
characters or symbols may be difficult to read.  
Do not pull on the tape being fed from the P-touch, otherwise the tape cassette  
or P-touch may be damaged.  
Do not attempt to cut the tape while printing or feeding since this will damage the tape.  
Do not try to print labels using an empty tape cassette set in the P-touch. Doing so will  
damage the print head.  
Remove the batteries if you do not intend to use the machine for an extended period  
of time. (Note: When no power is supplied for more than two minutes, all text and  
format settings will be cleared. Language and clock settings will also be cleared.)  
Be sure to turn off the machine before replacing the batteries or the tape cassette.  
Do not use old and new batteries together or mix alkaline batteries with other type  
batteries, or set the positive and negative end in the wrong position. Otherwise the  
batteries may have leakage or fracture.  
End of tape  
Set your language (Language options depend on the country of purchase.)  
• When no power is supplied for more than two minutes, all  
text and formats in the display will be lost. Language, unit  
and clock settings will also be cleared.  
Tape exit slot  
A blank horizontal line  
appears through the  
printed label.  
• There may be some dust on the print head. Remove the  
tape cassette and use a dry cotton swab to gently wipe the  
print head with an up-and-down motion.  
• Make sure that the end of the tape feeds under the tape guides.  
• Use only Brother M tapes with this machine.  
Choose a language with  
and press  
.
Set Date (DD/MM/YY) and Time (hh:mm)  
Example: setting the clock to 20th March 2006, 15:30  
Attach the back cover by inserting the  
two hooks at the bottom into the slots  
on the machine, then pushing down  
firmly on the cover until it snaps into  
place.  
The machine has  
Turn off the machine, and then while holding  
"locked up" (i.e., nothing  
happens when a key is  
pressed, even though  
the machine is on).  
down  
and  
, press  
to turn the machine  
and  
Date (DD/MM/YY)  
back on. Finally, release  
.
>
>
• After you have installed the tape, feed  
• Note: The text and formats in the display are erased. Also,  
the language, unit and clock settings will be cleared.  
input “20”  
input “03”  
input “30”  
input “06”  
the tape (  
+
) once and  
Time (hh:mm)  
then push in the tape cutter lever to cut  
The machine turns off  
when you try to print.  
• The batteries may be weak. Replace them.  
>
the tape.  
The tape does not feed • Make sure that the end of the tape feeds under the tape  
input “15”  
properly or the tape gets  
stuck inside the  
machine.  
guides.  
You can also confirm the current setting and continue to the next  
setting by pressing the right cursor key.  
• The cutter lever was used while printing. Do not touch the  
cutter lever during printing.  
Tape cutter lever  
All text and format  
settings need to be  
cleared to create a new  
label.  
• Press  
.
while holding down  
, or press  
, then  
• The machine automatically turns off if no key is pressed within 5  
minutes.  
• To cancel operations, press  
.
• To return the P-touch to its factory settings, turn it off, and then  
Specifications  
while holding down  
and  
, press  
and  
to turn the machine  
back on. Finally, release  
.
Item  
Specification  
Dimensions  
Weight  
172 mm (W) × 100 mm (D) × 58 mm (H)  
240 g (without batteries and tape cassette)  
Four AAA-size alkaline batteries (LR03)  
Power supply  
Tape cassette  
Brother M tape (width) :  
9 mm, 12 mm  
 

Billy Goat Vacuum Cleaner F042508A User Manual
Black Box Computer Accessories 26640 User Manual
Black Decker Cordless Saw JS650L User Manual
Bowers Wilkins Speaker 803 User Manual
Briggs Stratton Snow Blower 1695734 User Manual
Broilmaster Gas Grill H3XN 1 User Manual
Brookstone Home Safety Product 606013 User Manual
Brother Printer 4570CDWT User Manual
Canon Photo Printer iP5200 User Manual
Canon Projector LCOS Projectors User Manual